Clay Studio

Clay Studio

First firing for Komainu!





I finally have the first set of komainu loaded for a bisque firing.  Notice from the pics that we had to do a bit of placement tweeking to get as many pieces into the firing as possible.  It was extremely stressful lifting the green pieces, as you can imagine how fragile they are in this state!  However, it went smoother than anticipated.  My friend, Craig and I lifted them together.  I'm firing them up, today - veeerrry slowly!  Next will come a larger pair, then the "big mamas".  Stay tuned!  It's not over yet!  (I wish I know how to change the order of the pics, but you get the idea).

First firing complete!

I unloaded the first firing in my new kiln!  It fired like a Rolls Royce. The Big Bertha burners are incredibly powerful, and run smoooth!  They are everything Tom says they are.  The kiln was very responsive to any subtle changes made during the firing, which is key to having a kiln that works FOR you!  I'm in the process of preparing for another bisque of my larger pieces, while glazing some smaller works for a cone 6 firing.  Stay tuned for some pics of the process of loading my large lion dogs into the kiln.  Even the thought of it makes me nervous!



Kiln Ceremony

In Japan, before each firing, many ceramists do a small Shinto ceremony for a successful firing.  I have decided to continue this tradition - something I also did over the years living there.  I placed a pile of salt, rice, a bottle of sake, a sprig of a green representing a Japanese plant called "Sagaki", (meaning tree of the Gods), as well as a clay kiln God.  After placing these over the kiln, (where they will stay the duration of the firing, and be replaced with each firing), Tom Turner, a friend, Jacob Lions, and myself each took a small amount of salt, and threw it over the kiln, chimney and burners for purifying. 
I'm not a religious person, but I do believe in ceremony.  I enjoy it and also feel its significance.  In this case, I actually couldn't imagine firing my kiln without doing this.
The photo hanging to the left is in honor of a friend of mine, John Ward, who was key in helping make this kiln possible.  Although he's no longer here in body, I'm certain he's here in spirit.  Thank you, John!


Loading for a first firing!

The time has finally arrived!  I loaded my new kiln on 2/8/12 for a first firing.  I made a bunch of smaller pots for this "test" firing.  In loading, I realized how many pots this kiln can load.  I always like to pack my kilns tight, especially for bisque, but hadn't made enough pots to do that, so it's "loosey goosey".  At any rate, it's loaded and ready to take off!
What a treat being able to roll the door closed!  Wow!  I'll never get tired of doing that.  (Except that it IS a heavy door).